Building a grow box for bonsai in training
- Clicio
-
Offline
Topic Author
- Platinum Member
-
- Posts: 3555
- Thanks received: 1549
Building a grow box for bonsai in training was created by Clicio
Posted 5 years 6 months ago
A very simple grow box made to last 3 years.
Total cost:� 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
Bottom with feet.
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
Total cost:� 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
This image is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
This image is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
This image is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Bottom with feet.
This image is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
Please Log in or Create an account to join the conversation.
